TADD-3 Enclosure

Just finished the second piece of my multiplexed measuring system. This one isn’t too sexy, but is a necessary part — a pulse-per-second (“PPS”) distribution system. This enclosure contains 4 TADD-3 PPS distribution boards. Each board has 2 sets of 3 outputs, plus 2 RS-232 level outputs. So, there are 8 input connectors on the rear, as well as 4 DE9 connectors (the PPS signal is on the DCD line, and I’m only bringing out the RS-232 signal from the […]

Read More Here! 0